Categories

Products

Bonus Deal

Order this Month to get a Free Drill Holder valued at $49.95 included with your Vice.

Distributors

Oz-Vice products are distributed in New Zealand by Keybrands Marketing Ltd.

Information

Reviews

Resources


Reviews for: Vise and Clamping Tool [Vise-and-Clamp]

$380.00

Displaying 1 to 15 (of 16 reviews) Result Pages:  1  2  [Next >>] 
James K of Adelaide Date Added: Tuesday 07 February, 2012
I am very impressed by your Bench Pro 2000. I am particularly impressed because it has expanded what I can do with my wood carving. I mainly use a 'dremel' power tool. I make a lot of Scout woggles, as well as animals in low relief and in the round. I have found that the pipe jaws can hold carvings of any shape. No other vice I have seen can hold the range of shapes firmly, yet without stressing or breaking the carving. (Okay, I broke one woggle (a panther), but I was pushing the limits of what the wood could do). I often move from one bench to another. I use many of the functions demonstrated on your DVD. Most importantly, your service is magnificent, and I will be unreservedly recommending your product, and particularly, your company to all.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
John B. (Evandale, Tasmania) Date Added: Friday 09 December, 2011
Dear Sir, I write to thank you for very generous help in providing me with a new clamp for my Benchpro vice. I particularly appreciated the promptness with which you sent me the required part. I have had the vice now for about 12 years and in that time it has done an enormous amount of work. I can not speak highly enough if it. Once again, thank you for your help. Your sincerely, John B., Evandale, Tasmania

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Tom Date Added: Sunday 11 January, 2009
I purchased my BENCH PRO unit during the Adelaide Wood Show, five years ago. It just couldn’t have happened at a better time. I was in the middle of building a replica of an Art-Deco style pedestal table; finding the right way to clamp and hold pre-cut timber legs to allow working on their fine details was a true nightmare. The system came as a blessing, instantly providing a “resolving” firm grip for the job. Since then the Bench-Pro and I have formed a solid ‘partnership,’ working together through numerous smaller and larger projects. The vice is the most used tool in my workshop; there is no work too small or too large for it - and that’s not a cliché. Presently, I’m just about to complete a 4-year degree in Interior Architecture at the University of South Australia. The program requires the designing and construction of a piece of furniture as part of the final submission and assessment. It is too early to say, but I reckon that the work is going quite smoothly, thanks to using a Bench Pro system. I think that, if the project proves to be successful, you will be entitled to a small chunk of my diploma, maybe not even that small…..:0) ! All the best! Tom

Rating: 5 of 5 Stars! [5 of 5 Stars!]
On behalf of Vicki Nicholson Date Added: Friday 14 September, 2007
Vicki Nicholson is a proffesional artist working mainly in acrylics and travels overseas teaching art to students. Vicki has been carving for over 20 years and now uses a Bench Pro 2000 which she finds invaluable with much of her work.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
James Beech Date Added: Friday 14 September, 2007
Some time ago I purchased one of the above and have found several items in the box which do not get a mention in the instructions, one of which is a plate with two semi-circular cut outs. Could you possibly email to me a copy of the latest instructions, please. This has been a magnificent tool and I would say it is the most used item in my workshop.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
John Carruthers (Newcastle) Date Added: Friday 14 September, 2007
I have had a benchpro 2000 for two years now and i have found it to be the most usefull clamping system I have used ever - my dad was so impressed he bought one - would recomend it to anyone.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
John Steinbeck (Beecroft) Date Added: Friday 14 September, 2007
I am writing to express my good thoughts about your product The Bench Pro 2000. I build high tech wooden kayaks for a hobby (I am on my third) and for this last boat a friend, (who also builds kayaks), loaned me his Bench Pro 2000 vice; vice is an inadequate word for this most versatile and useful item when it comes to wood work. The Bench Pro fits on any table, in fact because I am using it at present for long lengths of my kayak (19 feet), I have it attached to my ping pong table, where it can be attached and removed in less than a minute and inverted, which changes it, from being a large vice to one of a smaller size to handle smaller thin pieces of wood, which can be planed and managed extremely well, far better than my old bench vice. I have today ordered my own Bench Pro from your company and look forward to receiving it, as I know my friend will want the one he kindly loaned me back very soon. I wish your company all the best with this great product as it is exceptional.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Malcolm Skepper Date Added: Friday 14 September, 2007
At the recent Working with Wood Show in Adelaide your representative suggested I contacted you to pass on comments I made to him in praising your product. I purchased the Pro2000 vice 10 years ago at the same event, and it is very unusual to have a product perform as good as this over this period of time with absolutely nothing going wrong. It is in use on a regular basis and to date all parts are in original working order. Your company should be proud of their product. Keep up the good work.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Gil Cassir Date Added: Friday 14 September, 2007
I purchased the BenchPro2000 vice at the Perth Wood Show several years ago (at my wife's instigation: the demo was so good that she thought it was a tool I just HAD to have). It was one of my most useful purchases: so versatile, and portable, that I've ended up using instead of a standard wood/bench vice. That is, until a month ago, when I managed to break one of the jaws, doing something that the vice was not designed to do (bending metal tubing). On contacting your office, I was very pleasantly surprised at the level of courtesy and service: a replacement jaw was immediately shipped to me, free of charge, even for the postage. This is service above and beyond that normally provided by tool suppliers, and I commend you for it. I have no hesitation to recommend the BenchPro2000, and your company, to other wood-workers and handypersons, it's a good investment and gives them virtually another pair of hands.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
John Ludbrook (A very satisfied customer) Date Added: Friday 14 September, 2007
Having just visited the Building Show in Adelaide, and speaking to your representative, explaining to him that I bought one of his products 4 years ago, and have been using it just about every day for assisting with my hobby. I explained to him that my plastic vice covers were broken with use. I was pleasantly surprised to be given two new pieces, I have and would not hesitate to recommend your products to any one.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Video Review (Sydney Easter Royal 3) Date Added: Thursday 21 June, 2007
Live Video Review - Les at the Sydney Easter Royal Show purchased a BenchPro2000 in 1998.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Video Review (Sydney Easter Royal 2) Date Added: Thursday 21 June, 2007
Live Video Review - John at Sydney Easter Royal Show explains what he thinks of the BenchPro2000

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Video Review (Sydney Easter Royal 1) Date Added: Thursday 21 June, 2007
Live Video Review - Charles at Sydney Easter Royal Show has owned a BenchPro200 since 1993.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Video Review (Nambour Garden Show) Date Added: Thursday 21 June, 2007
Live Video Review - Stan at the Nambour Garden Show has owned a BenchPro2000 for 8 to 10 years

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Video Review (Canberra Wood Show) Date Added: Thursday 21 June, 2007
Live Video Review - Jeff (inventor of the Angle Man) at the Canberra Wood Show has owned a BenchPro2000 for 12 years.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Vise and Clamping Tool
Click to enlarge

Displaying 1 to 15 (of 16 reviews) Result Pages:  1  2  [Next >>] 
Back Write Review Add to Cart

New Products

Tell Someone


Tell someone you know about this product.

We Accept

Paypal accepted logo

Other payment types we accept

  Copyright © 2014 Bench Pro 2000
ABN: 88 053 554 984
Conditions of Use - Shipping & Returns - Privacy Policy - Bench Vise Kit
 
The easiest, most versatile bench vise and clamping kit; Bench Pro 2000 Home
Bench Pro 2000 Bench Vice joining a mitred corner. Multi-purpose woodworking tool for clamping
Home » Vise and Clamp Hardware » Vise-and-Clamp » Reviews » Product Reviews